Technical specification:
Smoke output: 3200 cuft/min
Area Coverage:100m2
Fuse: 20A/250V
Power: 3000W
Voltage: 220V or 110V
Fog tank volume:2L
Water Tank: Add around 7-8L water just cover the Water Line which remarked on case
Main fuel : Water, and add some haze liquid ( 1 Liter liquid can use for about 24 hours)
Control:DMX512/LED display control, Remote control
Packing size:78*38*54cm
G.W:46Kg
Notice:
1. Always make sure there is liquid in both tanks but no more than the MAX LEVEL. This machine is different with normal fog or low fog machine, as it can’t work with over level liquid if your pump switch is off. Operating without any liquid inside will cause pump out of work. If your low fog liquid is used up, can add clean water in the fog tank instead of the low fog liquid when the machine on working.
2. If both tank is water, will create thin fog, can only used indoor and no wind, the fog need enough time to accumulate, the wind will dissipate the fog quickly. It is good for small stage and water no cost, also easy to get. If want perfect heavy low smoke effect, MUST water tank put water, fog tank put low fog liquid.
3. Low fog liquid is pure water based mist liquid which no add water in it. Can only ship by sea, can't by express. If you can't find this kind fog liquid, can also use heavy fog liquid to instead.
4. The machine can operate nonstop, if you can add water and fog liquid once they use up
5. We recommend a frequent cleaning of the unit. Please use a soft lint-free and moistened cloth. Never use alcohol or solvents.
6.After you use the machine, need drain off the water in tank, then use cloth to dry it. Every time after usage, don’t turn off the power immediately, wait for 1-2 minutes then turn off the power.
